Voltero PS6 600Wh power station

All Voltero power stations have a built-in MPPT controller.

Voltero PS6 solar generator 600W has 1 x 230V/600W AC output (pure sine wave), so it can power most appliances less than 600W.

Working time (estimate) = 595Wh*0.8 / working power of your device = Hours (0.8=Conversion rate due to losses).

Please note that actual working time may vary in different situations.

Yes, for AC output, when the output is less than 3W, it will automatically power off after 8 hours.

For DC output, when the output is less than 50mAh, it will automatically power off after 4 hours.

For USB output, when the output is less than 30mAh, it will automatically power off after 3 minutes.

With the included 100W wall charger, it takes about 6 hours to fully charge. If you charge the device with our Voltero S110, it also takes 6 hours to fully charge the PS6 in optimal weather conditions. You can also charge the device with our C65 or C100 GaN chargers. With those wall chargers, it takes about 10 hours for the C65 and 6 hours for the C100. The unit can be charged to 80% in 3.5 hours with our wall charger or C100 GaN.

The device can be in standby mode, where the power supply, screen, and/or inverter can consume up to 50W. Remember to long-press the power button to completely turn the device off. If the device loses power when completely turned off, try charging it to 100% and using it to 0% two or three times to calibrate the battery.

If the problem persists, please contact customer service.

When the output exceeds the ports, the overload protection switch automatically trips. You must turn the power switch off and then back on. This will reset the device.

The station has a built-in smart and silent cooling fan, so during use, the fan will automatically turn on when the device is warmer to maintain the device, when the temperature drops to a certain level, the fan will turn off.

Voltero is widely compatible with solar panels from other brands, as long as the combined open circuit nominal voltage range is within 12-30V, 250w Max.

Due to the varying sizes of power stations and solar panels, we ship separately if your order contains multiple products, including portable power stations and solar panels.

- When the control buttons are enabled, even if no devices are being charged, some power will still be consumed without a load. Therefore, it is recommended to disable the control buttons after use to prevent power consumption.

If you feel the battery draining quickly when you first use it, this is because the remaining power information displayed is inaccurate when the product is first activated. The remaining power is automatically calibrated by discharging the battery to 1% and then charging it back to 100%.